Changing a parameter value – Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX User Manual
Page 17
Chapter 2
Parameter Option
2–4
Figure 2.7
Linear Parameter Number Screen
Param #
Val_Base
Linear: [ 90 ]
FGE Mode
F1
F2
F4
Stall Delay
<
Absolute Overspd
>
VP Warn/None Cfg
VP Flt/Warn Cfg
Par
Value:
17.6 RPM
Min:
0
Max:
1750
Link:
None
F3
Move to the Value area of the screen by pressing the
selection
Key. The cursor will move to the current value in RPM.
Figure 2.8
Linear Parameter Value Screen
Param #
Val_Base
Linear: [ 90 ]
FGE Mode
F1
F2
F4
Stall Delay
Absolute Overspd
Vp Warn/None CFg
Vp Flt/Warn CFg
Par
Value:
<
17.6 > RPM
Min:
0
Max:
1755
Link:
None
F3
IMPORTANT: In some cases you may find it is not possible to change the
value of a parameter. In cases where a parameter is being used as a source
or a link, you will be blocked from making any value changes.
Changing a
Parameter Value