Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 31)

Chapter 4
EE/BRAM Functions
4–2
Select option two (2) in the EE/BRAM menu with or
key. Press the key to select the storage function.
The display will respond with the question in Figure 4.3.
Figure 4.3
EE Parameter Save Verification
Store Data Parameters
Are you sure (Y/N) ?
To store all parameters to the non-volatile electronically erasable storage
press the
F1
soft designator (YES). To escape this function and
return to the EE/BRAM menu, press the
F4
soft designator
(NO).
Select option three (3) in the EE/BRAM menu with or
key to recall the parameter table. Press the key to
select this option. The screen will respond with the question in Figure 4.4.
Figure 4.4
EE Parameter Recall Verification
Recall Data Parameters
Are you sure (Y/N) ?
Press the
F1
soft designator for Yes or press the
F4
soft designator (NO) to Escape this function and return to the EE/BRAM
menu.
Saving Parameters to EE
Recalling EE Parameters