Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 23)

Chapter 2
Parameter Option
2–10
Figure 2.17
Base Value Selection
Val_Bas
F - Communication IO
Lin_Mode
F1 F2 F4 F3
< Analog Out 1>
Elem
G - Analog Output
Value : < 0000 > Hex
Min : 8001
Max: 7FFF
Link: None
If you wish to exit the FGE mode and save any value changes, press the
key twice. The verification screen in Figure 2.18 will appear.
Figure 2.18
Base Value Selections
Do You Wish to Save
Parameters/Links (Y/N)
To save value changes, press
F1
. To exit without saving values,
press
F4
.
If you wish to exit the FGE Mode and view parameters in the Linear Mode,
press the
F4
soft designator key while in an FGE Element or
Group screen. The GPT will return to the Linear Mode and display the
parameter that was last accessed before the FGE Mode was selected.
Exiting the FGE Mode
Returning to the Linear Mode