Accessing the drive status mode – Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX User Manual
Page 47
Advertising
Chapter 7
Process Display
7–2
Figure 7.1
Process Display Screen
Ä
0.00 FREQ CMD
0.00 VEL FB
0.00 COMP PWR
0.00 MTR VFB
0.20 MTR I FB
0.00 TORQ FB
ConFig
Main Menu Dsp_Mode
F1
F2
F4
F3
In this case the Process display came up in the AB–Logo mode.
To access the Drive Status Mode from the initial Process Display, press the
F3
soft designator key.
The Mode entry window in Figure 7.2 will appear.
Figure 7.2
Mode Selection Window
Enter Mode:
<
>
2 - Status
1 - Logo
3 - Meter
Accessing the Drive Status Mode
Advertising