Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 52)

Chapter 7
Process Display
7–7
the new letter or character you wish to enter, press the to save
this new character.
If you wish to delete the complete word and enter a new word, press the
F4
soft key to blank out the complete text line.
It is also possible to enter the text in hex. Press the
F3
soft
key to activate the Char_Val option. The display will respond with the
window shown in Figure 7.10.
Figure 7.10
ASCII Entry Dialog Box
Enter ASCII (Hex ): < >
Min: 20
Max: 7F
Config: Var#3
Data
Param
Scale
Text
/ DULi
Char_Val Blank
Enter your desired ASCII text within the cursors and press the
key to save the new characters.