Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 35)

Chapter 5
Link Summary
5–2
Press the key to access the links currently in the system. The
display will now show the first parameter in the system (Figure 5.2).
Figure 5.2
Initial Link Screen
Link Summary:
SRC Sink
Parameter: None Parameter :
<
20
>
F Ć Communication IO
G Ć Drive to Drive
E Ć D2D Xmit Data
Sel_Type Clr_All NXT_Link
In this case, parameter 20 (Drive Link Transmit Data 1) is not currently
linked to another parameter.
If you wish to check the link on a specific parameter, you may enter the
parameter number directly in the Sink Parameter display using the numeric
keys.
If you wish to scroll to the next linked parameter, press the key
or use the F3 soft designator key.
The text “Searching” will appear on the display as the GPT scrolls through
the parameter table searching for links. If no link is found, the display stops
at the point where the search began.
Searching for Linked Parameters