Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX - Manual (Page 32)

Chapter 4
EE/BRAM Functions
4–3
To reset the parameter values to initial factory default values, choose option
four (4) in the EE/BRAM menu with the or key.
Press the key to select this option. The display will respond
with the question in Figure 4.5.
Figure 4.5
Initial Parameters to RAM Verification
Factory Defaults to RAM
Are you sure (Y/N) ?
Press the
F1
soft designator for Yes or press the
F4
soft designator (NO) to escape this function and return to the EE/BRAM
menu. If you choose Escape, another verifcation screen will prompt you on
saving parameters.
Saving Factory Defaults to RAM