Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX User Manual
Page 41
Advertising
Chapter 5
Link Summary
5–8
Figure 5.8
Node to Parameter Display
Link Summary
Sink
Parameter :
F -
G -
E -
Node : : : <
D2D Baud Rate
Src
IMPORTANT: The screen shown in Figure 5.8 allows you to enter the
information needed to Link a Node to a Parameter for Function Block
linking.
The Node to Parameter;
Parameter to Node;
and Node to Node;
options are currently non–functional. Only Option 0, Parameter to
Parameter linking should be attempted at this time.
For additional information on Function Block linking, refer to the Advanced
Programming Manual 1336–5.9.
Advertising