6 - clock data, General, Accessing the clock data function – Rockwell Automation 1201 GRAPHIC PROGRAM TERM 3.XX User Manual
Page 42: Clock data
Advertising
6
Chapter
6–1
Clock Data
This Main Menu option allows you to program clock and time functions
within the Drive.
The software function keys are programmed to allow you to set the clock
(Set_Clk), set the time reference (Set_Ref), zero the accumulator (Zero_Acc)
or load the clock into reference (Load_Ref).
From the Main Menu, use the
or
key to place the
cursor on Option 6, Clock Data (Figure 6.1).
Figure 6.1
Main Menu
Main Menu:
3 - Fault Queue
4 - Warning Queue
5 - EEPROM/BRAM
6 - Clock Data
7 - Function Block
Help
<
General
Accessing the Clock Data Function
Advertising