Rockwell Automation 1441-DYN25-MBAL Balancing Extension Module for the Dynamix 2500 User Manual
Page 38
38
Rockwell Automation Publication 1441-UM004A-EN-P - May 2011
Chapter 2 Balancing Extension Module
5.
Press the F2 (Wts) to display the Weights Summary Table screen.
The Weights Summary screen appears.
The Weights Summary Table screen displays the mass, angle, and radius for your
trial, correction, and trim weights. If the correction or trim weights are split (in
the continuous case) or fixed positions are chosen, then the two sets of correction
weights display sequentially. An asterisk next to a trial weight indicates that the
weight has been removed.
Combine the Balance Run Weights
After your balancing runs, you may want to combine your correction and trim
weights into a single weight.
Follow these steps to access the combine weights screen.
1.
From the Weights Summary Table, press F2 (Comb Wt.).