Rockwell Automation 1336-GM1 Remote I/O Communications Module User Manual
Page 34
Advertising
3–4
Installing the Module
3. Connect a SCANport cable (1202-Cxx) to a module and product.
Important: For the location of the SCANport connector on your
product, refer to its user manual. If you are using a port
expander, refer to its documentation.
Figure 3.2
Connecting the SCANport Cable
4. Connect a Remote I/O cable to the module and link or controller.
Figure 3.3
Connecting the Remote I/O Cable
.
Module
SCANport Product
1
SH
2
Blue
Shield
Clear
.
..
1
SH
2
Blue
Shield
Clear
PLC Controller
Module
Advertising
This manual is related to the following products: