Option features, Required equipment, Option features -2 required equipment -2 – Rockwell Automation 1329I DeviceNet Option FRN 1.XXX User Manual
Page 10
1-2
Getting Started
Option Features
The DeviceNet option supports the following:
•
Polled I/O, change of state, and cyclic data exchange.
•
Explicit messaging.
•
Explicit Unconnected Message Manager (UCMM).
•
Autobaud.
•
Self-generating EDS files.
•
Faulted node recovery.
•
Parameters for the 1329I unit and for the DeviceNet option.
The DeviceNet option does not support PCCC, so applications such as
DriveExplorer and DriveTools32 cannot be used to program and monitor the
1329I unit. However, applications such as DeviceNet Manager and
RSNetWorx for DeviceNet can be used with the 1329I unit.
Required Equipment
Equipment Supplied with the Drive
When unpacking your DeviceNet option, verify that the package contains
the following:
•
DeviceNet option.
•
One open-style 10-pin linear plug for DeviceNet.
•
Screws and a washer
•
Grounding wrist strap.
•
This user manual.
User-Supplied Equipment
Before attempting to install or configure the DeviceNet option, verify that
you have the following:
•
Small flathead and small Phillips screwdrivers.
•
DeviceNet cable. Refer to the DeviceNet Cable System Planning and
Installation Manual.
•
Tools for configuring the DeviceNet network and devices on it (e.g., a
computer running DeviceNet Manager). For information on these
products, refer to
in the
.
•
Tools for configuring the processor and scanner on the network. For
example, a computer running RSLogix 5 or RSLogix500. For
information on these products, refer to
in the
.