Rockwell Automation 1329I DeviceNet Option FRN 1.XXX - Manual (Page 23)

Configuring the 1329I Unit and DeviceNet Option 3-5
2. Double-click the icon for the 1329I unit. The Device Configuration -
Enhanced Mode dialog box appears.
Figure 3.8 Device Configuration - Enhanced Mode Dialog Box
Parameters for the 1329I unit and DeviceNet option are displayed under
Parameters. You can either scroll through the parameters in the list, or
you can select a specific group of parameters in the Parameter Group
box.
Appendix B contains a complete list of the parameters and
parameter groups for the 1329I unit and DeviceNet option.
Setting the Node Address If switches 7 and 8 on the DeviceNet option are On, the value of Parameter
103 - [NV MAC ID] determines the node address. By default, this
parameter sets the node address to 63. We recommend changing the node
address to a new, unique node address because all new devices use 63 as a
default node address.
1. In the Device Configuration - Enhanced Mode dialog box ( Figure 3.8 ),
double-click Parameter 103 - [NV MAC ID]. The Device
Configuration - Modify Numeric Parameter dialog box appears.
Figure 3.9 Modifying the Node Address Parameter
2. Type a unique node address, and then click Save to Device.