Rockwell Automation 1746-BAS-T SLC 500 Basic Basic-T Modules - Manual (Page 73)

Publication 1746-UM004B-EN-P - December 2005
Specifications A-3
1747-PBASE BASIC
Development Software
Specifications The BASIC development software must be loaded into a personal
computer to operate. This personal computer must conform to the
following specifications.
• IBM PC/AT compatible computer with display and keyboard
• DOS version 3.1 to 6.22
• 640 KB of RAM memory
• 1 floppy disk drive (3 1/2 in. or 5 1/4
in.)
• Hard disk with 2 MB free disk space
• One RS-232 compatible serial port
Refer to the BASIC Development Software Programming Manual,
publication 1747-PM001, for additional information.
Related Products The following table lists the products related to the module.
Product Catalog Number
8 KB EEPROM Memory Module for 1746-BAS module 1747-M1
32 KB EEPROM Memory Module for 1746-BAS module 1747-M2
8 KB EEPROM Memory Module for 1746-BAS-T module 1771-DBMEM1
32 KB EEPROM Memory Module for 1746-BAS-T module 1771-DBMEM2
BASIC Development Software 1747-PBASE
Communication Cable, 1828.8 mm (72 in.) length, interchangeable with
C-11 cable) 1747-C10
Communication Cable, 304.8 mm (12 in.) length, interchangeable with
C-10 cable) 1747-C11
Communication Cable, 914.4 mm (36 in.) length, different from C-10 and
C-11 cables) 1747-C13
Interface/Converter (RS-232 to RS-485) 1747-PIC
Link Coupler 1747-AIC
SLC 5/01 controller 1747-L511, -L514
SLC 5/02 controller 1747-L524
SLC 5/03 controller 1747-L531, -L532
SLC 5/04 controller 1747-L541, -L542,
-L543
SLC 5/05 controller 1747-L551, -L552,
-L553