Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual User Manual
1734 point i/o ethernet/ip adapters
Advertising
Table of contents
Document Outline
- 1734-UM018B-EN-P 1734 POINT I/O EtherNet/IP Adapters User Manual
- Important User Information
- Preface
- 1 – Overview of the 1734 POINT I/O EtherNet/IP Adapter
- Overview
- Adapter Features
- What the Adapter Does
- Physical Features of Your Adapter
- Hardware/Software Compatibility
- Important Adapter Considerations
- Use of the Common Industrial Protocol (CIP)
- Understand the Producer/ Consumer Model
- Specify the Requested Packet Interval (RPI)
- Support for Rack-optimized and Direct Connections
- Before You Begin
- Chapter Summary
- 2 – Install Your 1734 POINT I/O EtherNet/IP Adapter
- 3 – Configure the Adapter with RSLogix5000 software
- 4 – Configure the Adapter for Direct Connection in RSLogix 5000 Software
- Overview
- Set Up the Hardware
- Create the Example Application
- Configure the I/O Modules
- Add the POINT I/O Adapter to the I/O Configuration
- Edit the Controller Tags
- Create the Ladder Program
- Download the Program to the Controller
- Verify the Module Chassis Size
- Configure the Adapter with Fixed IP Address
- Recover From an Overloaded Adapter
- Chapter Summary
- 5 – Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
- 6 – Troubleshoot the Adapter
- A – Specifications
- B – Adapter Web Dialogs
- C – Configure the RSLinx Ethernet Communication Driver
- Index
- Back Cover