Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual - Manual (Page 21)

Rockwell Automation Publication 1734-UM018B-EN-P - October 2013 11
Chapter
2
Install Your 1734 POINT I/O EtherNet/IP
Adapter
Overview This chapter describes how to physically install the POINT I/O Series B
EtherNet/IP adapter; and how to connect the adapter to your EtherNet/IP
network. The only tools you require are a flat or Phillips head screwdriver and a
drill.
This chapter includes the following topics:
Topic Page
Mount the POINT I/O Adapter on a DIN Rail 12
Install POINT I/O Modules 13
Replace An Adapter 14
Wire a POINT I/O Adapter 15
Chapter Summary 16
ATTENTION: You must only use Series C and above POINT I/O modules
with POINT I/O Adapters. Series A or Series B POINT I/O modules do not
work with POINT I/O Adapters (does not apply to POINTGuard modules).