Chapter summary – Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual User Manual
Page 60
Advertising
50
Rockwell Automation Publication 1734-UM018B-EN-P - October 2013
Chapter 4 Configure the Adapter for Direct Connection in RSLogix 5000 Software
Chapter Summary
This chapter provided instructions on how to configure the POINT I/O
Adapter for Direct Connection through the the RSLogix 5000 software. It
included information about setting up the hardware and configuring the I/O,
adding the adapter to the configuration, and configuring the adapter with a fixed
IP address.
Advertising