Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual - Manual (Page 108)

96 Rockwell Automation Publication 1734-UM018B-EN-P - October 2013
Appendix C Configure the RSLinx Ethernet Communication Driver
Configure the AB_ETH
Driver To configure the AB-ETH Ethernet communication driver perform the
following steps:
1. Start the RSLinx software.
2. From the Communications menu, select Configure Drivers.
3. Select Ethernet Devices from the list and click Add/New...
4. Select the default driver name (for example, AB_ETH-1) or type in a name
and click OK.
The Configure driver
dialog opens.