Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual - Manual (Page 49)

Rockwell Automation Publication 1734-UM018B-EN-P - October 2013 39
Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4
3. From the modules listed select the 1734-OW2 relay output module and
click Create.
The New Module dialog opens.
4. Enter values for Name and Slot, noting that we used the following values.
Name POINT_Relay_Output
Slot 1