Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual - Manual (Page 68)

58 Rockwell Automation Publication 1734-UM018B-EN-P - October 2013
Chapter 5 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
3. Select your adapter (in this example, we use 1734-AENT/B) from the list
and click Create.
The New Module dialog opens.
4. Select the General Tab and enter the module details, noting that we used
the following values.
5. Click Change...
The Module Definition dialog opens.
Name POINT_IO_Adapter
IP Address 10.88.70.2
IMPORTANT Note that the slot field is disabled because the slot is automatically
0 for the 1734-AENT/B adapter.