Rockwell Automation 57C620 AutoMax Programming Executive Version 3.8 - Manual (Page 225)

20Ć1 Software Troubleshooting
20.0 SOFTWARE
TROUBLESHOOTING
Error messages may be displayed on the screen if there are
problems with memory, disks, or databases. This section describes
some actions you can take to correct these problems.
20.1 Memory Errors
Some errors are caused by insufficient memory. An error message
will indicate if this occurs. The Executive software requires 1MB of
RAM. When one of these errors occurs, exit the Executive, make
more RAM memory available and reĆstart the application.
Memory can be freed by:
D closing other Windows applications
D removing any terminate and stay resident (TSR) programs (e.g.,
Sidekick)
D removing any network drivers or moving them to high memory
D removing any other drivers or moving them to high memory
D reducing the memory reserved for environment variables
D reducing the number of files and buffers reserved in CONFIG.SYS
(Windows requires at least 30 files and 10 buffers).
The Microsoft Windows User's Guide provides additional information
on configuring your personal computer's memory.
20.2 Disk Errors
Some errors are caused by problems with the disk on which files are
stored. An error message will indicate if this occurs. When one of
these errors occurs, check for problems with the disk or disk drive
and reĆstart the application.
Disk problems include:
D a writeĆprotected disk
D lack of sufficient disk space
D protection on the disk or directory (for a drive on a network server)
D hardware problems with the disk drive