Rockwell Automation 57C620 AutoMax Programming Executive Version 3.8 - Manual (Page 57)

5Ć1 Using the System Configurator
5.0 USING THE SYSTEM
CONFIGURATOR
The System Configurator is used to create, edit, import, and delete
systems, sections, and racks. The System Configurator is the first
screen displayed after the AutoMax Programming Executive
identification screen. Three columns entitled Systems, Sections, and
Racks are shown on the screen.
These columns list in alphabetical order the systems in the current
library, sections in the selected system, and racks in the selected
section.
The current library is displayed on the top line of the screen. A library
is the highest level of organization in the AutoMax Programming
Executive. Normally, the first system in the list will be highlighted as
the default selection, along with the first section and rack in the two
other columns. The sections displayed are sections within the
selected system. Likewise, the racks displayed are racks within the
selected section. Figure 5.1 illustrates the System Configurator menu
structure.
Figure 5.1 Ć System Configurator Menus