Rockwell Automation 57C620 AutoMax Programming Executive Version 3.8 - Manual (Page 43)

4Ć9 Getting Around in the AutoMax Executive and Windows
4.14 Closing an Application
You can use the Exit command to close a Windows application. Any
changes that have been made in the application will be saved, and
you will return to the application you were running prior to the
present application. Closing the System Configurator application will
return you to DOS unless you have elected, during AutoMax setup, to
exit to the Windows Program Manager group. See section 5.5.2 for
more information. See figure 4.8.
If you are using the keyboard:
Step 1.
Press ALT+(underlined letter) of the leftĆmost menu on the
screen.
Step 2. Press E to execute the Exit command.
If you are using a mouse, double click the Control menu box.
Figure 4.8 Ć Closing an Application