Rockwell Automation 1440-TTC06-00RE XM-362 Temperature Module - Manual (Page 11)

Publication GMSI10-UM008D-EN-P - August 2010
3
Using this Manual This manual introduces you to the XM-361 and XM-362 Temperature
modules. It is intended for anyone who installs, configures, or uses the
XM-361 and XM-362 Temperature modules.
Organization
To help you navigate through this manual, it is organized in chapters based on
these tasks and topics.
Chapter 1 "Introduction" contains an overview of this manual and the
XM-361 and XM-362 modules.
Chapter 2 "Installing the XM-361/362 Temperature Module" describes how
to install, wire, and use the XM-361 and XM-362 modules.
Chapter 3 "Configuration Parameters" provides a complete listing and
description of the XM-361 and XM-362 parameters. The parameters can be
viewed and edited using the XM Serial Configuration Utility software and a
personal computer.
Appendix A "Specifications" lists the technical specifications for the XM-361
and XM-362 modules.
Appendix B "DeviceNet Information" provides information to help you
configure the XM-361 and XM-362 over a DeviceNet network.
Appendix C "DeviceNet Objects" provides information on the DeviceNet
objects supported by the XM-361 and XM-362 modules.
For definitions of terms used in this Guide, see the Glossary at the end of the
Guide.
Document Conventions
There are several document conventions used in this manual, including the
following:
The XM-361 and XM-362 Temperature modules are referred to as
XM-361/362, Temperature modules, devices, or modules throughout this
manual.
TIP
A tip indicates additional information which may be
helpful.