Rockwell Automation 1440-TTC06-00RE XM-362 Temperature Module - Manual (Page 55)

47 Publication GMSI10-UM008D-EN-P - August 2010
Chapter
3
Configuration Parameters
This chapter provides a complete listing and description of the XM-361 and
XM-362 parameters. The parameters can be viewed and edited using the XM
Serial Configuration Utility software and a personal computer. If the module is
installed on a DeviceNet network, configuring can also be performed using a
network configuration tool such as RSNetWorx (Version 3.0 or later). Refer to
your configuration tool documentation for instructions on configuring a
device.
For information about See page
General Parameters 48
Channel Parameters 48
Alarm Parameters 50
Relay Parameters 52
4-20 mA Output Parameters 57
Triggered Trend Parameters 58
I/O Data Parameters 61
Data Parameters 62
Device Mode Parameters 64
IMPORTANT
The
The appearance and procedure to configure the parameters
may differ in different software.