Rockwell Automation 2098 CompactLogix Indexing Motion Accelerator Toolkit Quick Start - Manual (Page 55)

Publication IASIMP-QS011B-EN-P — January 2009 55
Motion Logix Integration Chapter 5
In this example, GenericMachine_COND is renamed SorterMachine_COND.
Using the DeviceNet Tag Generator
Follow the steps in this section to enable communications to the axes of motion.
Open the DeviceNet Tag Generator
Follow these steps to open the DeviceNet Tag Generator.
1. From the menu in RSLogix 5000, choose
Tools>DeviceNet Tag Generator.
2. Step 1 of the wizard
prompts you to locate
the RSLogix 5000 file
that you are presently
using. Browse to the
location of your Logix
application file and
double-click it. This
selects the file and
moves to the next step
of the wizard.
IMPORTANT
You do NOT need to perform the steps in this section if the Ultra3000 drives were
automapped to the DeviceNet scanner module in order, starting at node address 01.