Workstation pcie card locations, Raid storage capacity – AJA TruZoom User Manual

Page 14

Advertising
background image

TruZoom v1.1

www.aja.com

14

SAS/SATA drive cage::

The Athena Power drive cage is the approved drive cage. Each drive cage can house four
(4) SSD drives, so two drive cages are required.

Detailed product information can be found at:

http://athenapower.com/node/99

SAS/SATA cables::

• SFF-8087 (device) to 4xSATA (host) fanout cable

• Two fanout cables are required to connect the LSI RAID controller to the Intel SSD

drives housed in the two Athena Power drive cages.

• These cables can be sourced from several on-line retailers.

Graphics card:

High speed GPU equipped graphics card

Computer components:

• Touch-screen monitor

• Mouse with scroll wheel

• Keyboard

Workstation PCIe Card

Locations

Two configurations of these PCIe cards that have been tested and approved. Choose one
of the options from the following chart and install the cards into the recommended PCIe
slots on the system’s motherboard.

RAID Storage Capacity

For 10-bit RGB 4K at a resolution of 4096x2160 and 60fps, total record times in minutes
for the qualified RAID configurations are as follows:

Table 1. Options for PCIe Card Locations for HP820

Slot

Option 1

Option 2

Slot 1

Empty

Empty

Slot 2

GPU

GPU

Slot 3

Empty/Covered by GPU

Empty/Covered by GPU

Slot 4

Corvid Ultra HIB

LSI Controller

Slot 5

Empty

Empty

Slot 6

LSI Controller

Corvid Ultra HIB

Slot 7

Empty

Empty

Table 2. RAID Configuration Storage Capacity

SSD Configuration Record Time (minutes)

8 x 240GB

16

8 x 300GB

20

8 x 480GB

32

8 x 600GB

40

8 x 800GB

53

Advertising