AJA TruZoom - Manual (Page 28)

TruZoom v1.1 www.aja.com 28
Firmware Update The TruZoom software package contains firmware for the Corvid Ultra frame. If the
currently installed firmware does not match the version recommended for the newly
installed TruZoom software, then the following notice screen will appear.
Figure 15. Firware Update Notification Screen
You are given the options to continue without updating firmware, update now, or exit
the update procedure.
To Update Corvid Ultra
Firmware:
Click on Update firmware now to begin the update. You will see the following updater
screen.
Figure 16. Firmware Updater Screen)
1. Device Menu: Currently connected Corvid Ultra
2. Current Bitfile Info: Current firmware installed in the Corvid Ultra
3. New Bitfile Info: Indicates the default firmware ready for installation. Click on the Find
button to select another cu44.bit file, if necessary.
4. Click Update to begin.