AJA TruZoom - Manual (Page 47)

TruZoom v1.1 www.aja.com 47
Stop Next KF: Sets the timeline to stop at each keyframe as it plays. Pressing the PAUSE button resumes
playback to the next keyframe.
TL <--: Jogs the timeline backward one frame.
TL -->: Jogs the timeline forward one frame.
Timeline Status The box at the lower right corner of the Playback Mode screen reports the status of the
current cursor location of the timeline, and some associated keyframe parameters.
Figure 35. Timeline Status Box
Timeline Effect Save
and Load
Up to 100 (0 - 99) timeline effects can be created for a Show. Effects can be built and run
during a show for replay use. At the end of show, the operator can quickly recall saved
registers which load the clip as well as the timeline, so highlights can be examined and
replayed.
A directory of effects is maintained in the Show Folder. The timelines themselves are
stored in the clip folders. You can have as many effects as you want associated with a clip.
Figure 36. Timeline Effect Registers
Save As: Opens a pop-up dialog where you can enter the Name and Bank and Register number of
the timeline effect. Pressing Save saves the register.
Load: After selecting a Bank and Register number the name of the clip is displayed. Pressing
Load loads that effect. The clip associated with the effect is loaded. If there is a timeline in
the effect, then it will be cued. If there is no timeline, then the playout will be positioned
at the saved frame index.