AJA TruZoom - Manual (Page 39)

TruZoom v1.1 www.aja.com 39
Learning and Recalling
Virtual Cameras
Virtual Cameras are created (learned) and recalled from registers (numbered 0 to 99) that
store an assigned name and the ROI position and size information.
Learn: .To create a Virtual Camera setting:
1. Select the ROI for that Virtual Camera.
2. (Optional) Enter a name for the Virtual Camera by clicking on the name field and
typing the characters with the computer keyboard.
3. “Learn” the register into the desired bank, by pressing Learn, followed by [register #]
or Learn, Bank, [bank #], [register #].
• If the desired register bank is already selected (indicated in the window above the
Bank button), click Learn, and then click on the keypad number of the register you
want to use.
• If you are not in the desired register bank, click Bank, click the number of the
desired bank, then click the number of the register you want to use.
Recall: The GUI’s numeric keypad is available for instant Virtual Camera recall by number. Virtual
Cameras are stored in banks of registers, corresponding to the 10s and 1s digits of
numbers 00-99. Once a bank has been selected, single digit entry recalls that
corresponding Virtual Camera in that bank.
To recall a Virtual Camera: use #, or Bank, #, #.
• If the correct register bank is already selected, simply click on the keypad number of the
Virtual Camera register you want to recall.
• If you are not in the correct register bank, click Bank, click on the number of the desired
Bank, and then click the number of the Virtual Camera register you want to recall.