Preset transitions – AJA TruZoom User Manual
Page 37
TruZoom v1.1
www.aja.com
37
Learn:
Use the Learn button to store virtual camera information into registers. Click Learn to put
the keypad in a learning mode. In this mode, you can use the Bank button and numeric
keypad buttons to assign the register that will store the current ROI settings. See
“Learning and Recalling Virtual Cameras” on page 39
.
Cut:
This button selects a Cut transitions between different ROI selections.
Trans:
This button selects a Transition of an assigned rate (duration) between ROI selections.
Duration:
Specifies transition duration (in frames) between each ROI selection.
NOTE:
Cuts and transitions are not learned into the virtual camera setting. The must be manually
initiated at run time.
Preset Transitions
Preset mode allows you to preset a new ROI without affecting the current system video
output.
Figure 23. TruZoom Live Mode Preset UI Screen
Prepare:
Enters Preset mode and colors the Prepare button green. While in Preset mode, all
joystick, mouse/touch, and virtual camera operations affect a preset ROI indicated by a
green border.
Take:
Initiates a transition (either Cut or Trans) from the current red ROI to the preset green ROI.
NOTE:
A Take can also be performed by hitting the enter key on your keyboard.