Metrohm 794 Basic Titrino - Manual (Page 70)

2.13. Method memory, keys <USER METH>
794 Basic Titrino
66
2.13 Method memory, keys <USER METH>
Management of the internal method memory with key
<USER METH>.
Method identifications can be entered directly or
selected with the <SELECT> key.
recall method:
Loads a method from the internal method memory into
the working memory.
store method:
Stores the method which is in the working memory in
the internal method memory.
delete method:
Deletes a method from the internal method memory.
The display texts of the Titrino are shown to the left.
The values are the default values.
>recall method
method name:
Recall method
Recall method from the internal method memory to the
working memory (input of method name, which is
included in the memory).
If a method identification is entered which is not found
in the method memory, the selected value blinks.
>store method
method name:
Store method
Store method from the working memory to the internal
method memory (up to 8 ASCII characters).
If a method with an identical name is already stored,
you are requested if you wish to overwrite the old
method. With <ENTER> it is overwritten, with <QUIT>
you return to the entry.
>delete method
method name:
Delete method
Delete method from the internal method memory (input
of method name, which is included in the memory).
For safety, you are again asked if you really wish to
delete the method. With <ENTER> it is deleted, with
<QUIT> you return to the working memory.
If a method name is entered which is not found in the
method memory, the selected value blinks.
USER METH
)
3
user methods
>recall method