Belkin G+ MIMO F5D9231-4 User Manual
Page 29
27
G+ MIMO Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRnaTe seTUP MeTHOd
1�
IP address (1)
Provided by your ISP� Enter your IP address here�
2�
subnet Mask (2)
Provided by your ISP� Enter your subnet mask here�
3�
IsP Gateway address (3)
Provided by your ISP� Enter the ISP gateway address here�
setting your Internet service Provider (IsP) Connection Type to static IP
A static IP address connection type is less common than other connection types� If your ISP uses static IP addressing, you will need your IP address,
subnet mask, and ISP gateway address� This information is available from your ISP or on the paperwork that your ISP left with you� Type in your
information, then click “Apply Changes”
(4)� After you apply the changes, the Internet Status indicator will read “connected” if your Router is set
up properly�
(1)
(2)
(4)
(3)