Belkin G+ MIMO F5D9231-4 - Manual (Page 35)

33
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 6 7 8 9 10 5
alTeRnaTe seTUP MeTHOd
setting Custom domain name server (dns) settings
A “Domain Name Server” is a server located on the Internet that
translates Universal Resource Locators (URLs) like “www�belkin�com”
into IP addresses� Many Internet Service Providers (ISPs) do not require
you to enter this information into the Router� The “Automatic from ISP”
(1) box should be checked if your ISP did not give you a specific DNS
address� If you are using a static IP connection type, then you may
need to enter a specific DNS address and secondary DNS address for
your connection to work properly� If your connection type is dynamic or
PPPoE, it is likely that you do not have to enter a DNS address� Leave
the “Automatic from ISP” box checked� To enter the DNS address
settings, uncheck the “Automatic from ISP” box and enter your DNS
entries in the spaces provided� Click “Apply Changes” (2) to save
the settings�
(1)
(2)