Belkin G+ MIMO F5D9231-4 - Manual (Page 90)

88
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 6 7 8 10 9
TROUblesHOOTInG
Problem:
Do Belkin products support WPA/WPA2?
solution:
To use WPA security, all your clients must be upgraded to drivers and
software that support it� At the time of this FAQ publication, a security
patch download is available, for free, from Microsoft� This patch works
only with the Windows XP operating system� Download the patch here:
Download the patch here: http://www�microsoft�com/downloadS/details�
aspx?FamilyID=662bb74d-e7c1-48d6-95ee-1459234f4483
You also need to download the latest driver for your Belkin 802�11g
Wireless Desktop or Notebook Network Card from the Belkin support
site� Other operating systems are not supported at this time� Microsoft’s
patch only supports devices with WPA-enabled drivers such as Belkin
802�11g products�
Download the latest driver at http://www�belkin�com/support
Problem:
I am having difficulty setting up Wireless Protected Access (WPA)
security on my Belkin Router for a home network�
solution:
1� From the “Security Mode” drop-down menu, select “WPA-PSK (no
server)”�
2� Enter your pre-shared key� This can be from eight to 63 characters
and can be letters, numbers, symbols, or spaces� This same key
must be used on all of the clients that you set up� For example,
your PSK might be something like: “Smith family network key”�
3� Click “Apply Changes” to finish� You must now set all clients to
match these settings�