Belkin G+ MIMO F5D9231-4 - Manual (Page 45)

43
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsInG THe Web-based adVanCed UseR InTeRfaCe
1� Wi-Fi Protected Setup (WPS): Enabled or Disabled�
2� Personal Identification Number (PIN) Method: In this method, a
wireless client wishing to access your network must supply a 4- or
8-digit PIN to the Router� After clicking “Enroll”, you must start the
WPS handshaking procedure from the client within two minutes�
3� Router PIN: If an external registrar is available, you may enter in the
Router’s PIN to the registrar� Click “Generate New PIN” to change
the PIN from the default value� Click “Restore Default PIN” to reset
the PIN value�
4� Push Button Configuration (PBC) Method: PBC is an alternate
method to connect to a WPS network� Push the PBC button
located on the back of the Router for three seconds, and then
initiate the PBC on the client device� Alternatively, push the “Start
PBC” soft button to start this process�
5� Manual Configuration Method: This section lists the default security
settings to be set up if not using WPS�