Belkin G+ MIMO F5D9231-4 - Manual (Page 38)

36
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsInG THe Web-based adVanCed UseR InTeRfaCe
1� IP address
The “IP address” is the internal IP address of the Router� The default IP
address is “192�168�2�1”� To access the advanced setup interface, type
this IP address into the address bar of your browser� This address can
be changed if needed� To change the IP address, type in the new IP
address and click “Apply Changes”� The IP address you choose should
be a non-routable IP� Examples of a non-routable IP are:
192�168�x�x (where x is anything between 1 and 254)
10�x�x�x (where x is anything between 1 and 254)
172�y�x�x (where x is anything between 1 and 254 and y is anything
between 16 and 31)
2� subnet Mask
There is no need to change the subnet mask� This is a unique, advanced
feature of your Belkin Router� It is possible to change the subnet mask
if necessary; however, do NOT make changes to the subnet mask
unless you have a specific reason to do so� The default setting is
“255�255�255�0”�
Changing lan settings
All settings for the internal LAN setup of the Router can be viewed and changed here�
(1)
(2)
(5)
(6)
(3)
(4)