Belkin G+ MIMO F5D9231-4 - Manual (Page 42)

40
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsInG THe Web-based adVanCed UseR InTeRfaCe
Changing the Wireless Channel
There are a number of operating channels from which you can choose—
in the United States, there are 11 and in the United Kingdom (and most
of Europe), there are 13� In a small number of other countries, there are
other channel requirements� Your Router is configured to operate on the
proper channels for the country in which you reside� The channel can
be changed if needed� If there are other wireless networks operating in
your area, your network should be set to operate on a channel that is
different than the other wireless networks�
Using the Wireless Mode switch
This switch allows you to set the Router’s wireless modes� There are
several modes�
note: Some modes may require firmware updates to be enabled�
1)
Off
This mode will turn OFF the Router’s access point, so no wireless
devices can join the network� Turning off the wireless function of your
Router is a great way to secure your network when you are away from
home for a long period of time, or don’t want to use the wireless feature
of the Router at a certain time�
2) 802�11g only
Setting the Router to this mode will allow only 802�11g-compliant
devices to join the network, keeping out any slower 802�11b devices�
3) 802�11b+g
Setting the Router to this mode will allow 802�11b- and
802�11g-compliant devices to join the network�