Belkin G+ MIMO F5D9231-4 - Manual (Page 93)

91
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 6 7 8 10 9
TROUblesHOOTInG
3� Under the “Wireless
Networks” tab, click the
“Configure” button and you
will see the following screen�
4� For a home or small
business user, select
“WPA-PSK” under
“Network Administration”�
note: Select WPA (with radius
server) if you are using this
computer to connect to a
corporate network that supports
an authentication server such as
a radius server� Please consult
your network administrator for
further information�
5� Type in your encryption key
in the “Network key” box�
Important: Enter your pre-shared
key� This can be from eight to 63
characters and can be letters,
numbers, or symbols� This same
key must be used on all of the
clients that you set up�
6� Click “OK” to apply settings�