Belkin G+ MIMO F5D9231-4 - Manual (Page 41)

39
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsInG THe Web-based adVanCed UseR InTeRfaCe
Configuring the Wireless network settings
The “Wireless” tab lets you make changes to the wireless network settings� From this tab you can make changes to the wireless network name or
Service Set Identifier (SSID), operating channel, encryption security settings, and configure the Router to be used as an access point�
Changing the Wireless network name (ssId)
To identify your wireless network, a name called the SSID is used�
The SSID is your network name� The default network name of the
Router is “Belkin G + MIMO Wireless” followed by six digits that are
unique to your Router� Your network name will look something like
“Belkin_G+MIMO_Wireless_123456”� You can change this to anything
you choose, or you can leave it unchanged� Keep in mind, if you decide
to change your wireless network name, and there are other wireless
networks operating in your area, your network name needs to be
different from other wireless networks that may be operating in your
area� To change the SSID, type in the SSID that you want to use in the
SSID field (1) and click “Apply Changes” (2)� The change is immediate�
If you make a change to the SSID, your wireless-equipped computers
may also need to be reconfigured to connect to your new network
name� Refer to the documentation of your wireless network adapter for
information on making this change�
note: Please periodically check for new Router firmware updates
from the “Utilities > Firmware update” page� Newer firmware can fix
problems, add wireless features, and/or improve wireless performance
(see page 64)�
(1)
(2)