Belkin G+ MIMO F5D9231-4 - Manual (Page 75)

73
G+ MIMO Wireless Router
sections table of contents 1 2 3 4 5 6 8 9 10 7
ManUally COnfIGURInG neTWORK seTTInGs
5� If “Manually” is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
(1)
(3)
(4)
(2)
6� If not already selected, select “Using DHCP” next to “Configure:”
(3), then click “Apply Now”�
your network adapter(s) are now configured for use with the Router�