Metrohm 893 Professional Biodiesel Rancimat - Manual (Page 30)

3.4 Connecting a computer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭
893 Professional Biodiesel Rancimat
3.4 Connecting a computer
3.4.1 Connecting the 893 Professional Biodiesel Rancimat and the com-
puter
NOTE
The StabNet computer program has to be installed before you can
connect the instrument to the computer.
The StabNet computer program allows you to control up to 4 instru-
ments.
Connect and set up the 893 Professional Biodiesel Rancimat as follows:
1 Establish a connection between the USB interface (2-16) of the 893
Professional Biodiesel Rancimat and the required USB interface on
the computer using the USB cable (6.2151.130).
2 Start the StabNet computer program.
3 Switch on the 893 Professional Biodiesel Rancimat using the power
switch.
4 Wait for the instrument 893 Professional Biodiesel Rancimat to be
detected and installed.
5 Enter the instrument information into the dialog fields of the 893
Professional Biodiesel Rancimat configuration.
NOTE
You will find detailed information regarding the StabNet com-
puter program in the Tutorial.
The instrument name entered in the configuration must appear on
the instrument display (3-3).