Metrohm NIRS DS2500 Analyzer - Manual (Page 19)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
￭￭￭￭￭￭￭￭ 11
3 Connect the other end of the data cable to the computer's network
cable connector.
3.5 Switching on the instrument
Switching on the instrument
1 Turn the on/off switch to the position I.
￭ The LED display on the front of the NIRS DS2500 Analyzer (1-3)
lights up.
￭ The instrument performs a self-test.
￭ The sample compartment lid opens.
2 Wait until the software has recognized the instrument.