Metrohm NIRS DS2500 Analyzer User Manual
Page 34
Advertising
6.2 User maintenance
■■■■■■■■■■■■■■■■■■■■■■
26
■■■■■■■■
■
Guide the lamp cables through the rectangular opening of the
lamp holder.
■
Place the lamp holder onto the lamp's reflector. The spring on the
lamp holder keeps the lamp in the correct position.
3 Connecting the lamp cables
■
Push the two white cables all the way into the corresponding
screw terminal by hand or using tweezers.
■
Tighten the screw terminals using the small screwdriver.
Advertising