Metrohm 941 Eluent Production Module - Manual (Page 36)

4.6 Installing the Dosino
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 ￭￭￭￭￭￭￭￭
941 Eluent Production Module (2.941.0010)
3 Connecting the eluent bottle
￭ Push the FEP tubing attached to the eluent bottle through the
cable conduit from the rear to the front of the 941 Eluent Produc-
tion Module.
￭ Screw the FEP tubing onto port 3 of the Dosino.
4 Connecting the waste container
￭ Attach the adapter to port 4 of the Dosino and screw the fourth
FEP tubing onto the adapter.
￭ Guide the other end of the FEP tubing from the front through the
cable conduit to the rear of the 941 Eluent Production Module
and attach to the waste container.
Inserting the Dosino into the instrument
1 Insert the Dosino sideways into the Dosino holder.
The cable has to rest on the left side in the recess designated for this
purpose.
2 Guide the Dosino cable through the cable conduit to the rear of the
instrument.
3 Plug the Dosino cable into one of the MSB sockets.