ADS Environmental Services Model 3600 530002 A2 - Manual (Page 58)

Ring, Sensor, and Special Installations 4-25
01-17.pcx
Leveling the Plate
l To ensure that the plate remains level, hold the adjustment nuts firmly in place
with the aid of a 7/16 in. (11 mm) wrench. Firmly tighten the 7/16 in. (11 mm)
securing nuts against the bottom side of the plate.
l Attach the ultrasonic sensor to the installed ultrasonic plate via the quick
disconnect mount. Verify the installed ultrasonic sensor is level.
01-02.pcx
Installing the Sensor on the Plate:
Engage the Slide Mount on the Upstream Side and Slide the Ultrasonic Sensor Back until It Hits the Stop.