ADS Environmental Services Model 3600 530002 A2 - Manual (Page 81)

Monitor Installation and Activation 5-7
The following supplies are required for installing the pavement box.
Quantity Unit Description
1 Each Quazite PG1730BB12 Box with Mouseholes
1 Each Quazite PG1730CA00 Non-Locking Cover
1 Each Quazite UH0357AA Long Cover Hook (for cover removal)
1 Each 13 mm (0.5 in.) Rigid Galvanized Conduit Nipple--a
minimum of 15 cm (6 in.) longer than the manhole wall
thickness
1 Each Type EY-1, 13 mm (0.5 in.) Sealing Fitting--Killark (brand)
or equivalent
1 Each Noalox Conduit Joint Compound--Ideal (brand) or
equivalent
2 Kg (5 lb) Hydraulic cement--Thompsons (brand) or equivalent
2 Each 13 mm (0.5 in.) Plastic Bushings
1 Each 13 mm (0.5 in.) diameter by 25 mm (1 in.) long Nipples
1 Each Roll of PVC Electrical Tape
25 Kg (50 lb) Pea Gravel
20 L (5 gal) Clean Water for Cement and Tool Clean-up
If installing the conduit from the manhole to the pavement box,
you will also need the following parts and supplies.
1 Each Female 13 mm (0.5 in.) PVC Adapter
as
needed
m or ft 13 mm (0.5 in.) PVC conduit (must be long enough to
extend from the manhole to the pavement box)
7 Each Smooth 90
°
13 mm (0.5 in.) PVC Elbows
1 Each Can of PVC Primer (follow all of the safety instructions
on the label)
1 Each Can of PVC Glue (follow all of the safety instructions on
the label)