Can-Am DS250 - Manual (Page 101)

ENGINE
Air Filter
Removal/Cleaning
CAUTION: Never remove or mod-
ify any component in the air filter
housing. The engine carburation
is calibrated to operate specifically
with these components.
Other-
wise, engine performance degra-
dation or damage can occur.
Remove seat.
Release clamps and remove air filter
housing cover.
vmo2006-014-045_a
1. Air filter housing cover
Loosen clamp and remove retaining
screw, then remove air filter.
vmo2006-014-046_a
1. Clamp
2. Retaining screw
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put the filter in to soak.
While filter soaks, clean inside the air
filter housing.
Rinse the filter with warm water until
all cleaning solution disappears.
NOTE: If the air filter foam is still dirty,
replace it with a new one.
Then, let the filter dry completely.
When the filter is dried, re-oiled with
air filter oil (P/N 219 700 340) or an
equivalent.
CAUTION: Engine performance
degradation or severe damages
can occur if the air filter is not prop-
erly maintained and/or if it not well
oiled.
Installation
Properly reinstall removed parts in the
reverse order of their removal.
NOTE: Make sure that air filter hous-
ing cover is installed properly.
Air Filter Housing Draining
CAUTION: Never remove or mod-
ify any component in the air filter
housing. The engine carburation
is calibrated to operate specifically
with these components.
Other-
wise, engine performance degra-
dation or damage can occur.
Periodically inspect air filter housing
drain tube for liquid or deposits.
_____________________
99