Liquids, Fuel, Recommended fuel – Can-Am DS250 User Manual

Page 77: Fuel level, Engine oil, Recommended oil, Oil viscosity

Advertising
background image

LIQUIDS

While reading this Operator’s Guide, remember that:

ƽ

WARNING

Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.

NOTE: This section specifies the rec-
ommended liquids and procedures to
check their levels. Refer to MAINTE-
NANCE
for procedures to replace the
liquids.

Fuel

Recommended Fuel

Use regular unleaded gasoline, avail-
able from most service stations or oxy-
genated fuel containing a maximum
total of 10% of ethanol or methanol
or both. The gasoline used must have
the following recommended minimum
octane number.

OCTANE NUMBER

Inside North

America

(87 (R + M)/2)

Outside North

America

92 RON

CAUTION: Never experiment with
other fuels. The use of unrecom-
mended fuel can result in vehi-
cle performance deterioration and
damage to critical parts in the fuel
system and engine components.

Fuel Level

ƽ

WARNING

Always stop engine before refu-
eling. Open cap slowly. If a dif-
ferential pressure condition is no-
ticed (whistling sound heard when
loosening fuel tank cap) have ve-
hicle inspected and/or repaired
before further operation. Fuel is
flammable and explosive under
certain conditions. Never use an
open flame to check fuel level.
Never smoke or allow flame or
spark in vicinity. Always work in
a well-ventilated area. Never top
up the fuel tank before placing the
vehicle in a warm area. As tem-
perature increases, fuel expands
and may overflow. Always wipe
off any fuel or oil spillage from the
vehicle.

Engine Oil

Recommended Oil

Use 4-stroke engine oil that meets or
exceeds the requirements for API ser-
vice classification SM, SL or SJ. Al-
ways check the API service label on
the oil container, it must contains at
least one of the above standards.

Oil Viscosity

SAE 5W30 oil is recommended for all
seasons.

_____________________

75

Advertising