Can-Am DS250 - Manual (Page 105)

vmo2006-014-042_a
1. Remove muffler end
2. Muffler
vmo2006-013-006_a
1. Spark arrester
Remove carbon deposits from the
spark arrester using a brush.
NOTE: Use a soft brush and be careful
to avoid damaging spark arrester.
Reinstall the spark arrester in muffler.
Air Injection Valve Filter
Cleaning
vmo2006-014-066_b
LH SIDE OF ENGINE
1. Air injection valve
Disconnect hoses from air injection
valve.
Remove air injection valve from its
support.
While holding one half, turn the other
half counterclockwise to open.
vmo2006-014-073_a
1. Filters
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put filters in to soak.
While filters soaks, clean inside the air
injection valve.
Rinse filters with warm water until all
cleaning solution disappears.
NOTE: If air filters are still dirty, re-
place them with new ones.
Then, let filters dry completely.
_____________________
103